Cable annealing equipment is suitable for electric welding machine-UZO annealing equipment

The base of most cable annealing equipment will have an annealing chamber installed, and the upper part is connected to an annealing top cover. The top cover is mainly divided into a lower cover and an upper cover. This product is applicable to electric welding machines and thermal relays, etc. If you are interested, please contact Let’s learn about it with Kehua Xiaobian! A cable annealing equipment A cable annealing equipment includes a base, an annealing chamber is installed in the middle of the upper end of the base, and an annealing top cover is connected to the upper part of the annealing chamber. The top cover includes a lower cover and an upper cover, and a motor is connected above the upper cover. It is characterized in that: the outer circular surface of the lower cover is symmetrically provided with a hinge part; the hinge part and the base are connected with a lift device; the lifting device includes a No. 1 connecting seat, a No. 2 connecting seat, a No. 1 booster cylinder, a No. 1 booster rod, a lower swing rod, an upper swing rod, a No. 2 booster cylinder and a No. 2 booster rod. The lower ends of the No. 1 connecting seat and the No. 2 connecting seat are connected to the base, the bottom of the No. 1 booster cylinder is connected to the No. 2 connecting seat, the lower end of the hem rod is connected to the No. 1 connecting seat, and the No. 1 booster cylinder is connected to the No. 1 connecting seat. The number booster rod is connected with the lower middle part of the lower swing rod, the upper middle part of the lower swing rod is connected with the lower end of the upper swing rod by means of hinge, the middle and upper part of the upper swing rod is connected with the hinge part by means of hinge, and the The upper end is provided with a bracket, and the bracket is connected with the No. 2 booster cylinder in a hinged manner, and the No. 2 booster cylinder is connected with the upper end of the sway rod through the No. 2 booster rod. Applicable places for cable annealing equipment: It is suitable for continuous load experiments and heating of electric welding machines, spot welding machines, boilers, forging annealing, etc. Relays, switches, etc., are used as power sources for temperature rise experiments, protection characteristic experiments, continuous load experiments, and electrical parameter measurement experiments. Cable annealing equipment The above is the relevant introduction of cable annealing equipment. The lifting device of this product includes No. 1 connecting seat and No. 1 booster cylinder. The No. 1 connecting seat is connected to the base. This equipment is mainly suitable for spot welding machines. Heating equipment such as boilers and forging annealing, if you want to know more information, please pay more attention to the Kehua website!