Heat treatment experimental equipment has fast temperature rise and fall rate

The heat treatment experimental equipment mainly uses silicon carbon rods and resistance wires as heating elements. The inner furnace is made of polycrystalline fiber material, and it is also equipped with an air cooling system, which has the characteristics of high temperature control accuracy. If you are interested, you can follow Kehua small. Let’s make it together to understand! Description 1.1 Temperature classification 600℃~1800℃; 1.1 This paragraph uses silicon carbon rods, silicon molybdenum rods or resistance wires as heating elements, 1.2 It adopts a double-layer shell structure and a 30-segment program temperature control system, Phase-shift trigger, thyristor control, 1.3 The furnace is made of alumina polycrystalline fiber material, and the double-layer furnace shell is equipped with an air cooling system, which can quickly increase and decrease the temperature. The furnace has a balanced temperature field, low surface temperature, and fast temperature rise and fall rate. , energy saving and other advantages. 1.4 Adopting international advanced technology, there are various types of tube furnaces such as horizontal and vertical. 1.5 It has the advantages of safety and reliability, simple operation, high temperature control accuracy, good heat preservation effect, large temperature range, high furnace temperature uniformity, many temperature zones, optional atmosphere, vacuum furnace type, etc. Heat treatment experimental equipment Product structure features Laboratory heat treatment furnace product structure features: 1. The electric furnace shell adopts a double-layer forced air cooling structure, so that the outer temperature of the furnace shell is close to room temperature when the electric furnace is at high temperature, and the height is not higher than 50 degrees Celsius. 2. The material of the furnace is made of light alumina ceramic fiber, which has excellent thermal insulation effect, light weight and high temperature resistance. 3. The energy saving effect is 60-80% of the old electric furnace. 4. The temperature control adopts Yudian temperature control instrument, which has 30-50 segment programmable PID self-tuning. Automatic heating. Automatic cooling. No need to be on duty. Stop. Pause heating. Set heating curve. Storage heating curve. History curve record and other functions. Adopt Taiwan brand all-intelligent 16-segment or 32-segment PID control temperature controller, the temperature controller is a two-line LED display dial, mainly used for temperature control, sensitive response, heat preservation, cooling temperature curve, unattended, PID control, with Deviation, over-temperature power-off alarm and other functions make it possible for the consistency and reproducibility of any test or experiment. With automatic constant temperature and time control functions, and with a secondary over-temperature automatic protection function, the control is reliable and safe to use. It can display temperature, temperature segment number, segment time, remaining time, output power percentage, voltage, current, etc. Heat treatment experimental equipment The above is the relevant introduction of the heat treatment experimental equipment. The temperature control of the equipment is self-tuning through the programmable PID of the electric temperature control instrument. As long as the switch is turned on, there is no need to be on duty, and the degree of automation is high. I would like to know more information Just pay more attention to the Kehua website!