How to maintain a cooling tower motor? -[Lingyan Electromechanical] One-stop solution for industrial cooling tower engineering

Cooling towers are regularly inspected for shaft watertight seals and wiring harnesses. If the motor's running noise problem is fixed, it would be better to grease regularly and find too much noise. Bearings are replaced to prevent moisture from water, and complete seals, bearings, to prevent water. Prevents moisture, electrically corrodes clean water lily sheets, sound insulation blankets, removes dirt. Line maintenance. A water lily is closed on one side to prevent it from being remembered again. Connect the cooling equipment, check for leaks (especially the mast section), and replace the seal if it is leaking. (1) Check whether the terminal of the motor is in good condition, whether the motor rotates normally, the box of the motor is sealed, the motor bearing is oiled and lubricated, and the motor shell is painted. Stop for a period of time, it is recommended to exercise at least three hours a month, and keep the motor coil dry and lubricate the bearing surfaces. (2) Check the normal rotation of the reducer gear reducer, if there is a different sound, replace the reducer bearing immediately. (3) Adjust the wire, loosen the belt, and prolong the service life of the belt. Check for any damage, cracks, and, if necessary, the owner recommends replacing the belt. Check the pulleys, electric, tighten the bolts, the flowers are loose and replace the rust. (4) Clean the dirt on the surface of the door leaf switch, check the door, door leaf angle and fan leaf clearance, and adjust.
induction heating system are all following the most compatible manufacturing regulations.
To learn more about induction heating system， give us a call at Shandong Kehua Intelligent Equipment Co.,Ltd. or visit us online by going to Kehua Electric Furnace.
The high frequency induction heating machine induction heating system has significantly numerous benefits over other high frequency induction heating machine systems, which makes it first choice for high frequency induction heating machine.