I didn't expect this laboratory quenching furnace to be so good
Kehua laboratory quenching furnace PK type instrument introduction: Name: Laboratory quenching furnace PK type Brand: Kehua Remarks: Kehua quenching furnace is specially designed for quenching, annealing and preheating in oxidizing atmosphere. Semi-hermetic furnaces can operate under partial shielding gas, and in the glass industry, quenching furnaces can preheat molds. Quenching furnaces are specially designed for quenching, annealing and preheating in an oxidizing atmosphere. Semi-hermetic furnaces can operate under partial shielding gas, and in the glass industry, quenching furnaces can preheat molds. Kehua laboratory quenching furnace PK type furnace structure description: (1) The frame of the furnace is made of low carbon steel; (2) The furnace is insulated with light bricks; Electric heating wire; ⑷The door is equipped with a safety switch; ⑸The cable is installed on the back of the furnace; ⑹The cable is a 3-phase CEE plug; 15 temperature steps, the operator can start the selected program at the preset date and time, because the temperature controller has a real-time clock system; ⑻ control board on the side of the furnace; ⑼ semiconductor non-contact transfer relay; ⑽ S-type thermocouple. Laboratory Quenching Furnace Kehua Laboratory Quenching Furnace PK type main advantages: ⑴The side and bottom of the furnace are heated to ensure the air distribution inside the furnace, which meets DIN 17052-1 class A; ⑵The electric heating wire at the bottom of the furnace is made of SiC with high mechanical properties Plate covering; ⑶The furnace door is made of refractory concrete, which has high mechanical properties. The standard configuration of Kehua laboratory quenching furnace PK type furnace includes: (1) Manual door, up or down (2) INDUSTRY PID thermostat (3) Turntable (for PK 105, PK 520) (4) Base Kehua laboratory hardening furnace PK type optional accessories: (1) Graphics Temperature recorder; (2) The connection between the controller and the PC; (3) The protective atmosphere kit; (4) The semi-sealed design of the furnace; (5) The bottom of the furnace can be made of metal plate; Foot pedal to control the opening and closing of the door; ⑻ The furnace door can use a solenoid valve to control the opening and closing of the door; ⑼ Special base; ⑽ SiC side cover plate to protect the electric heating wire; SKV (for PK 25 and PK 105); ⒀ quenching box KK. Laboratory Quenching Furnace The above is the detailed introduction of the Kehua laboratory quenching furnace recommended by the editor. It is a reference for friends who need it. If you want to buy it, you can visit our official website.