Induction heating device can adjust the heating power

The working principle of the induction heating device is to achieve the required heating temperature through the inductor. During normal heating, the blank should be placed on the guide rail. The operator can also adjust the heating power and time. Let's get to know it together! The working principle of the induction heating device The push-type intermediate frequency induction heating furnace has only a pair of water-cooled guide rails in the inductor, and the blanks are placed on the guide rails. One end of the sensor is pushed in, the required heating temperature is reached through the sensor, and then pushed out from the other end of the sensor. The stepping induction heating furnace has two pairs of water-cooled guide rails in the inductor. One pair of guide rails is fixed and used to bear the quality of the blank during heating; The length of one material level before feeding. The working principle of the stepping mechanism: During normal heating, the blank is placed on the fixed guide rail. When feeding is required, the movable guide rail lifts up to lift the blank away from the fixed guide rail, and then moves forward by a length of the blank, and then falls down. Put the blank on the fixed guide rail, and move it horizontally backward to return to the normal heating state, that is, after the movable guide rail completes a square movement, a feeding task is completed, and a blank is loaded at the same time for the next time. For feeding. Induction heating device The outstanding features of the induction heating device: 1. Full power output; 2. Adjustable heating power and time, which is beneficial to improve the quality of heating and the repeatability of heating, and can simplify the operation of workers; 3. Simple installation, three on the street Phase 380V power supply, water inlet and outlet can be completed in a few minutes; 4. Controllable power: when heating, the power can be adjusted to meet the needs of different heating temperatures and speeds 5. Good effect: very uniform heating, fast heating, There are few oxide layers and no waste products after annealing. The pollution to the environment such as dust and noise should not be underestimated. Attention must be paid to purchasing intermediate frequency heating equipment produced by Yuantuo Electromechanical, which not only reduces dust and noise, but also has high efficiency and high yield, simple operation and energy saving. Reduce consumption. Induction heating device The above is the relevant introduction about the induction heating device. The installation of the heating device is very simple. It only needs to be connected to the three-phase 380V power supply. If you want to know more information, please pay more attention to the Kehua website!