Second-hand high-frequency heating machine is equipped with water shortage and overpressure alarm system
by:Kehua2022-08-05
The second-hand high-frequency heating machine equipment is equipped with alarm systems such as water shortage and overpressure. It has a wide range of applications and can be used to heat various workpieces. The accessories in the equipment are imported from abroad, and the quality is very good. If you are interested, please follow Kehua Xiaobian to learn about it! Equipment features 1. Power saving: 30% less power than the tube type, 20% less than the thyristor intermediate frequency. 2. Stable performance: complete protection, no worries. This equipment is equipped with alarm systems such as water shortage, overcurrent, overheating, and overvoltage. 3. Fast heating speed: no oxide layer, small deformation of the workpiece. 4. Easy to install and operate. 5. The inductor is isolated by the transformer, which is safe. 6 Environmental protection: no pollution, noise and dust. 7. Widely used: It can heat all kinds of workpieces. 8. Low failure rate: The IGBT module of this equipment is provided by Siemens of Germany, and the electrolytic capacitor is provided by Samsung of Japan. All electronic components are strictly screened and tested to ensure stable operation of the equipment. 9. The latest control circuit of our company adopts phase-locked loop control and fully automatic tracking. It completely overturned the history that second-hand high-frequency induction heating equipment could not be empty, and greatly improved the heating efficiency. The new protection function minimizes the failure rate of the equipment. Second-hand high-frequency heating machine and second-hand high-frequency welding equipment uses: 1. Second-hand high-frequency welding machine is used in the field of welding: welding of various diamond composite drill bits; welding of various carbide tips and saw blades; various Welding of mining accessories such as picks, drill bits, drill pipes, coal drill bits, and air drill bits. 2. Second-hand high-frequency welding machines are used in the field of quenching: quenching of various gears, sprockets, and shafts; quenching of machine tool bed guide rails in the machine tool industry; quenching of hardware tools. 3. Second-hand high-frequency welding machines are used in the field of diathermy: hot upsetting of various high-strength bolts and nuts; hot-rolled twist drills; diathermy forging of all parts within a diameter of 80. Advantages of second-hand high-frequency welding machine for metal parts brazing: 1. Induction heating speed is fast and efficiency is high. 2. Energy saving and low cost. 3. Multiple workpieces can be welded at one time, which greatly improves the welding efficiency. 4. The oxidation area is small. 5. The heating is uniform, and there is no lack of soldering and missing solder joints. 6. The weld seam of the workpiece after welding is firm and full. Second-hand high-frequency heating machine The above is the relevant introduction about the second-hand high-frequency heating machine. This equipment can not only weld multiple workpieces at one time, but also save energy and electricity. After welding, the weld seam of the workpiece is not only firm but also full, which definitely meets the needs of customers. Satisfied with the effect, if you want to know more information, please pay more attention to the Kehua website!