Some things to pay attention to when moving cooling towers

When the cooling tower is assembled and ready for normal operation, the following necessary checks should be done first: 1. Check whether there is enough gear oil in the reducer. Do not operate the reducer without oil; if it is a belt reducer, please check the belt 2. Please confirm whether the legs of the cooling equipment are fixed to the foundation; 3. Check whether the line is out of phase and whether the voltage is 380V; 4. Turn on the motor and run the fan for 20 years Turn off after a few seconds, check whether the fan rotates clockwise, do not rotate in the opposite direction; and check the operation of the fan to see if there is any abnormal noise; 5. Turn on the water pump, and the cooling tower must not run idly for a long time in the state of no water; 6. Make sure whether the current value of the cooling tower motor is within the normal value range. If the current is too large, please check the voltage. If the voltage is too low, the current will be too large. If the voltage is normal, check whether the angle of the cooling tower fan blades is normal; if the above If the problem is normal, then check whether there is oil in the cooling tower reducer; 7. If the cooling tower is running continuously for 100-120 hours, check whether the cooling tower fan fasteners are loose, and re-fix if necessary; 8. Check the cooling equipment body and cooling tower support Check whether the screws connecting the legs and the foundation are loose, and re-fix if necessary; 9. After the cooling tower has been running for ten days, check whether the belt is loose in the belt reducer, and whether the gear reducer is low in oil; after two months of continuous operation, the belt reducer should Replace the belt and gear oil of the gear reducer; 10. After the cooling equipment has been running for two months, please clean the cooling tower water receiving tray and each piping, the debris and sludge of the filler; 11. Check whether the water replenishment device is effective. Lingyan is a cooling tower manufacturer and a square cooling tower manufacturer, specializing in the production and sales of cooling towers and water pumps. If necessary, please feel free to contact us online.​
Shandong Kehua Intelligent Equipment Co.,Ltd. is the largest manufacturer of induction heating system, which is one of the best product manufactured from us.
Shandong Kehua Intelligent Equipment Co.,Ltd. serves a wide variety of professional markets and industries across the globe. Contact us at Kehua Electric Furnace to find the you have always dreamt of.
The same determination is critical for business owners. The journey in induction heating system business is both a challenging and rewarding experience.