This horizontal crankshaft quenching machine must be what you are looking for

The solid solution heat treatment of crankshaft quenching machine heats the alloy to a high temperature single-phase zone and maintains it at a constant temperature, so that the excess phase is fully dissolved into the solid solution, and then rapidly cooled to obtain a supersaturated solid solution. The phenomenon that the properties of aged alloys change with time when they are placed at room temperature or kept slightly higher than room temperature after solution heat treatment or cold plastic deformation. The solid solution treatment of the crankshaft quenching machine fully dissolves various phases in the alloy, strengthens the solid solution, improves the toughness and corrosion resistance, and eliminates stress and softening, so that it can continue to be processed and formed. The aging treatment is heated and kept at the temperature at which the strengthening phase is precipitated, so that the strengthening phase of the crankshaft quenching machine is precipitated, hardened and increased in strength. Crankshaft quenching machine quenching refers to heating the steel to A. , or A. . (The lower critical point temperature of the steel) above a certain temperature, the steel is austenitized and then cooled at an appropriate cooling rate, so that the workpiece can undergo martensite and other unstable microstructure transformations in all or a certain range of the cross section. Heat treatment process to obtain martensite (or bainite) structure. Common quenching processes in Kehua include salt bath quenching, martensite graded quenching, bainite isothermal quenching, surface quenching and local quenching. The purpose of quenching: to obtain the required martensitic structure of the steel, improve the hardness, strength and wear resistance of the workpiece, and prepare the structure for the subsequent heat treatment, etc. Crankshaft quenching machine Kehua horizontal crankshaft quenching equipment Model: LH-CHJ Power: 15-160KW Shaft: φ10-300mm L: 50-1500mm Gears: φ20-300mm H: 10-600mm Application: suitable for overall quenching of shafts , Tempering automation Suitable for quenching and tempering of various workpieces, such as induction quenching of shafts, gears, guide rails, discs, pins, and other parts; It has continuous quenching, simultaneous quenching, and segmented continuous quenching , simultaneous quenching and other functions in sections; ●Use CNC system or PLC and frequency conversion speed control system to realize workpiece positioning and scanning, and connect with induction power supply through PLC to realize fully automatic production. ●Vertical (shaft parts quenching) + horizontal (ring gear parts quenching) crankshaft quenching machine The above horizontal crankshaft quenching machine is what Xiaobian strongly recommends to everyone. It has a wide range of trials and many forms. A quenching machine that is well received by the public, don't miss it.