Induction Heating Equipment: Market oriented, technology driven and quality based

What is a heat treatment profile? What are the operating methods for CAD to make heat treatment curves?

by:Kehua     2022-08-04
What is a heat treatment curve? What are the operating methods for CAD to make a heat treatment curve? I don’t know how much you know about these concepts? Let Kehua explain it to you! I hope you can learn it. 1. What is the heat treatment curve? The heat treatment curve is the process record of the heat treatment. 2. How to look at the heat treatment curve. 100℃, the vertical heavy color indicates that the time is 1 hour per space. The light color indicates 30 minutes. Heat treatment curve 3. Operation method for CAD to make heat treatment curve 1. Open CAD software and insert raster image reference. Select the scanned disc paper. 2. The task box pops up, click OK. 3. Enter the CAD drawing page, find the appropriate position and click the left button, and then press the space bar to confirm. 4. Roll the mouse wheel to zoom in or out of the disc, and hold down the mouse wheel to drag. 5. First draw the heating curve with the spline curve (adjust the arc of the heating curve, use the space bar three times to confirm). Then draw the insulation curve with the arc line (use three points to determine the length of the line, click with the left mouse button). Draw the cooling curve with a straight line (use three points to determine the length of the line, click with the left mouse button). 6. Click the rounded corner icon, enter R, press the space, enter the number 20, and press the space. Click the heat preservation curve with the mouse, and then click the heating curve, and the CAD software will automatically round the corners. 7. Select the thick line 0.4 or 0.5 of the line, and click the line width icon to confirm. 8. Click the print icon first, select the printer in the task box, select A4 paper, and select the print range window. Click the latter window to enter the graphical interface, hold down the left mouse button and drag from the upper left corner of the disc paper border to the lower right corner, and click the left button to confirm. Go back to the print interface, select 1:1 in the print ratio, select the center print for the print offset, and then click Preview to print. What is a heat treatment curve? What are the operating methods for CAD to make a heat treatment curve? Seeing this, I believe everyone understands it! For a staff member, not only must be able to heat treatment, but also know how to read the heat treatment curve, understand Create a heat treatment curve. If you have any questions, please contact Kehua.
Custom message
Chat Online
Chat Online
Chat Online inputting...