What is the power saving rate of the intermediate frequency furnace? What are the advantages of the intermediate frequency furnace? -Kehua
The intermediate frequency furnace is a relatively advanced heating equipment. Many metallurgical enterprises are now using the intermediate frequency furnace. It not only heats very quickly, but also can greatly save energy consumption. Next, Kehua will introduce to you the power saving rate of the intermediate frequency furnace and what are the advantages of the intermediate frequency furnace? What is the power saving rate of the intermediate frequency furnace? , Super energy-saving structure, using fiber structure, can save 60% of electricity. The three-phase power frequency alternating current is converted into direct current after rectification, and then the direct current is converted into an adjustable intermediate frequency current, which supplies the intermediate frequency alternating current flowing through the capacitor and the induction coil, and generates high-density magnetic lines of force in the induction coil. The metal material contained in the induction coil is cut, and a large eddy current is generated in the metal material. Electricity-saving application case of intermediate frequency furnace What advantages does the intermediate frequency furnace have? Because the principle of the intermediate frequency furnace is electromagnetic induction, its heat is generated in the workpiece itself, and ordinary workers can use the intermediate frequency electric furnace to go to work immediately after the continuous work of the forging task. There is no need to worry about the waste of heated blanks due to power outages or equipment failures. According to Kehua, due to the fast heating rate of this heating method, there is very little oxidation. Compared with the KGPS thyristor intermediate frequency furnace, each ton of forgings saves at least 20-50 kilograms of steel raw materials, and greatly saves electricity. Electricity 310 degrees. Compared with KGPS thyristor intermediate frequency, it can save 20%-30% power. Because this heating method heats evenly, the temperature difference between the core and the surface is extremely small, it will not cause grid-side pollution, the power supply transformer will not heat up, the substation compensation capacitor will not heat up, and it will not interfere with the work of other equipment. The medium frequency induction furnace has the advantages of high thermal efficiency, short smelting time, less burning loss of alloy elements, wide smelting material, less environmental pollution, and can accurately control the temperature and composition of molten metal. The power saving rate of the intermediate frequency furnace can reach 60%, which can save a lot of costs for the enterprise, so now all metallurgical enterprises prefer to use the intermediate frequency furnace.